View Full Version : A couple of questions....
blunty
30-08-2005, 07:57 PM
Just a couple of questions here, if anyone can answer them.
1. I noticed the DD chrome GPU block is alot heavier than i thought, will the Graphics card be able to cope with it or will i need to give it a bit of extra support?
2. Whats the best way to set up the system, what order should everything come in after leaving the pump?
Ichabod Crane
30-08-2005, 08:08 PM
it should be able to hold it, your GPU should be screwed into place anyway. i would go pump- radiator- cpu-gpu and chipset if your going there. hope that helps
blunty
30-08-2005, 08:13 PM
it should be able to hold it, your GPU should be screwed into place anyway. i would go pump- radiator- cpu-gpu and chipset if your going there. hope that helps
Thanks, i assume the best place for the res in that loop would be before the pump?
Ichabod Crane
30-08-2005, 08:26 PM
yep preferably higher up than everythin else to remove bubbles, but obviosly if you have mounted your rad on the roof like most people do it cant be higher than that
sunnyg
30-08-2005, 09:06 PM
ye, thats the setup i have in my system. you have to be a bit cautious about where you place you pump. i have mine in between the rad. (on the roof) and the res. (on the floor) becuase sometimes a bubble can form just before the inlet of the pump, which is obviously not a good thing.