SST Temjin07

[krueml_]

Cheers ;)

Here are some shots of my Silverstone TJ07 silver..

Used hardware:

DFI LanParty Expert
AMD64 X2 3800+ @ 2800 @ 1.36v
XFX 7800GT
Corsair XMS Pro LED

WC:
Alphacool NexXxoS NB-N
DangerDen TDX 64
EK Waterblocks EK-FC79/SLI
BlackIce Xtreme Dual
Tank-o-Matic
Laing DDC Pro



http://www.4eweb.de/pc/tj07/15.jpg

http://www.4eweb.de/pc/tj07/16.jpg

http://www.4eweb.de/pc/tj07/17.jpg

http://www.4eweb.de/pc/tj07/18.jpg

http://www.4eweb.de/pc/tj07/19.jpg

http://www.4eweb.de/pc/tj07/20.jpg

I hope you like it.. ;)

[Daffy4895]

very nice, but isn't there an awfull lot of bubbles in your res??

[krueml_]

ye it is.. but only in the res!.. ;)
The laing has too mach powa..

[Daffy4895]

fair enough, you know that case is beginning to grow on me the more i look at it, i may get one as i'm having trouble locating the older stacker like coolermiester's

[ghost]

Beutiful case i was contemplating getting one myself but £200 odd quid is a bit much...very very nice though. :) nice set up.

[Madafwo]

I agree, that case looks gorgeous, shame about the price tag on it though.

Sweet set up you have there though, really like the red theme.

[DaveMac]

Very nice build, I really like the curved singlular construction.
It's a shame that Silverstone haven't starting doing matching bezels for the drives yet especially at that premium price.


I got rid of my bubble machine, I ended up having to run it with a piece of sponge over the inlet to stop the bubbles being drawn into the pump and back thru the loop.

http://img330.imageshack.us/img330/793/dualpump6002gw3.jpg

[Bubbles]

looks very nice there

[clocker]

Very pretty setup you have there.

Two questions:
1). Why does the waterloop take a detour down into the lower chamber?
I can see some sort of device down there but can't make out what it is...

2). How is the fit on your sidepanels?
Mine are a bear to remove/replace.

[Rig]

Cant you see the radiator sitting behind the PSU

[clocker]

Ah...senior moment.
Now that you mention it, of course I can see the rad.
It's exactly where mine sits.
Silly me.

[pdf27]

It's a shame that Silverstone haven't starting doing matching bezels for the drives yet especially at that premium price.
Hardly a major issue - the Lian Li bezels fit just fine with a small amount of modification to the mountings/drive mountings.

http://img313.imageshack.us/img313/697/picture0021lf.jpg

http://img79.imageshack.us/img79/436/picture0045qv.jpg

[DaveMac]

Hardly a major issue - the Lian Li bezels fit just fine with a small amount of modification to the mountings/drive mountings.


Ahh that looks superb, did you have to adjust the depth at all?

[Rig]

How did you get away with the drive rails?

[krueml_]

Just a quick update :P

http://www.4eweb.de/pc/tj07/33.jpg

http://www.4eweb.de/pc/tj07/34.jpg

http://www.4eweb.de/pc/tj07/35.jpg

http://www.4eweb.de/pc/tj07/36.jpg

http://www.4eweb.de/pc/tj07/37.jpg

[Mankz.]

that case is soo god damn totty.....

[krueml_]

:)

Some more shots with daylight


http://www.4eweb.de/pc/tj07/38.jpg

http://www.4eweb.de/pc/tj07/39.jpg

http://www.4eweb.de/pc/tj07/40.jpg

http://www.4eweb.de/pc/tj07/41.jpg

http://www.4eweb.de/pc/tj07/42.jpg

http://www.4eweb.de/pc/tj07/43.jpg

http://www.4eweb.de/pc/tj07/44.jpg

http://www.4eweb.de/pc/tj07/45.jpg

http://www.4eweb.de/pc/tj07/46.jpg

http://www.4eweb.de/pc/tj07/47.jpg

[Watters]

looks awesome, i love the case. Have you got any pics of the other side of the case? Are there vents there for air to come in and flow through the rad?

[|Slackster|]

Looks like a Excellent case and a very very neat setup aswell :)

[Teebor]

Looks neat, but I have a question.

That doesn't quite look like air bubbles in the res, is it an effect of the additive in the coolant? it looks quite neat

[Cybertronic]

krueml_, I suggest you take the tube out of the resevoir as it's a bit restrictive, I've never used the two tubes in both of my Tank O Matics. It would be a good idea to tighten the thumbscrews on your CPU waterblock to give it more pressure for better contact and overall it looks fantastic :)

[pie_uk]

that is very nice man, good work on that

[pie_uk]

am i right in thinking the black version is BTX , mobo upside down? or does this case support both~> ?

[krueml_]

http://www.4eweb.de/pc/tj07/68.jpg

http://www.4eweb.de/pc/tj07/69.jpg

http://www.4eweb.de/pc/tj07/70.jpg

In the part below will come a Thermochill PA120.3 and a Laing Ultra with Alphacool reservoir..

http://www.4eweb.de/pc/tc01.jpg

[tim_2_5]

what blocks are they on your mobo krueml, the black ones, who manufactures them, very nice setup btw

[krueml_]

Thanks. :) They're from EK Water Blocks..

[tim_2_5]

they look really nice, they are the acetal topped ones then?

[krueml_]

Exactly.. :)

[cool_dude]

Looks very very nice :)

[tim_2_5]

yeah it is , infact its giving me ideas;) , nooo musnt spend the money:P lol

[coolmiester]

That's a masterclass on how to run hose krueml_

Top quality :cool:

[krueml_]

And now it's almost finished.. :)

http://www.4eweb.de/pc/tj07/71.jpg

http://www.4eweb.de/pc/tj07/72.jpg

http://www.4eweb.de/pc/tj07/73.jpg

http://www.4eweb.de/pc/tj07/74.jpg

[Madafwo]

How is the rad mounted in the bottom half, is it held down by anything at all?

The tops on those waterblocks look great.

Edit: I have the opportunity to pick one of these up from work minus the mounting screws for £67 + VAT... I can see a project coming up and moving away from my beloved eclipse.

[ultramouley]

In a word, DROOOOOOOOOOOOOL.
I am thinking of aquiring the same case as a cube is to much and being able to mount a triple rad with little modding sounds like a case I want. plus it looks nice.

[Pete]

How is the rad mounted in the bottom half, is it held down by anything at all?

The tops on those waterblocks look great.

Edit: I have the opportunity to pick one of these up from work minus the mounting screws for £67 + VAT... I can see a project coming up and moving away from my beloved eclipse.

I know one that had stickback velcro used and one other use the fan shroud screws to pop a rivit in there

Hopes that of some use

[Leeum]

That looks awesome krueml_ !

Funny to see you modding a Silverstone - did ya run out of Wavemasters? :D

[krueml_]

The wavemasters are too small right now.. or where do you want to mount a PA120.3? :D

[ghost]

Krueml which Asus board is that you are using ?

[Rig]

Its a striker extreme i believe

[Allan]

where did you get the block from ? pm plz :D

[cool_dude]

krueml_ what camera are you using and how are you getting some of those images so sharp?

Nice Tube Routing Btw ;)

[lloyd_mcse]

Nice mate, doing a similar thing....

http://coolercasesuk.co.uk/showthread.php?t=3212

how did u mount ur rad? I used some brackets for kitchen cupboards, lol. Worked a treat. No drilling at all.
Regards

lloyd

[lloyd_mcse]

So what CPU are u running and what are ur temps like with that EK block?

[RHYSMODDER]

you make me jelous just by showing me photos of that Temjin07. Man it must look sexy in real life..

[lloyd_mcse]

Hi Guys,
so what coolant are u using? Is it just deionised water + dye or a feser coolant?

[Rig]

At the moment i got Feser Ultra Pure, but after seeing the blood red FluidXP today, im really tempted

[lloyd_mcse]

I really like the colour krueml_ has done his, is that the Acid green feser?
though the blood red does look awesome and very tempting!

[Rig]

Ah i get what you mean now, this is from before the days of the F1 stuff hitting the market, or in the UK atleast.

[lloyd_mcse]

Oh ok, so just distilled water and a dye then?

[Rig]

I presume, or could be some clear de-ironised.

[lloyd_mcse]

lol
Sorry i meant just any old dye, and not a feser one