FS: Modded case and WC gear.

[Kumo]

Modded Case

Guide and pics:
http://www.kusanagiweb.com/mods/lmi1.htm

Includes: All non remavable mods (vinyl, plexy, alu, grills, light hinges, etc...) Home made fillports, webcam, handles, PSU Antec 380w SP with sleeved wiring, etc...

Also included: Cathodes (long white and round blue). Mini-neon in the 3 1/2" bays with the ports front. Bay-bus for 3 fans Akasa + Compunurse in a 5 1/4" bay. Panaflo fan 120x38mm with the "funnel". If you don't want something can negociate a new price.

Not included: Power spliter (side door), 7 colours leds And the spider plexy scratch. The spider plexy has been sustituted for another transparent one. And the plexy with the hole for the pump, sustituted for one (also white) without the hole.

The full case for 110€ + shipping or 80€ + Shipping without the PSU.


WaterCooling stuff ALL SOLD

Eheim Compact 600 with Compactube (http://www.aquacomputer.de/onlineshop/pumpen.htm) (and also the original from for underwater use) with the 3 barbs (3/8 OD). Less than 6 months of discontinued use


Noise Isolator Rad (Copper and Brass). with its barbs also.

http://img72.imageshack.us/img72/5558/dscf00012ct.th.jpg (http://img72.imageshack.us/my.php?image=dscf00012ct.jpg)


Zalman Gold waterblock, base without scratches only the tipycal core maks by the use (less than 5 months) fixings for PIV/ AMD and 4 medium size fast connectors

http://img53.imageshack.us/img53/3416/dscf00023iu.th.jpg (http://img53.imageshack.us/my.php?image=dscf00023iu.jpg)

All together for only 75€ (+shipping). I have some silicon tubing here for the buyer. Good kit to start with watercooling.



Mail o Pm me if you have questions. The shipping is from Spain by your preferred method (you pay, you choose).

THX

[Teebor]

Sorry to be a pain Kumo, as I am not going to buy, but that pump is fascinating me.

I have not seen it before. Are those three barbs the inlets and outlets?

How does it work?

Feel free to ignore me :)

Teebor

[Kumo]

Don't worry, dude.

The Eheim compact 600 model has about 1year or little more. I found it in a pet shop and i was surprissed by the "low" price (about 30€) and the perfomance 600l/h with the Eheim qualitty. The pump is ready to work under the water, but aqua-computer makes the compacttube (it cost to me 35€, more than the pump!) for a in-line use without the need of res (they also makes inline adaptor for the eheim compact 300).

The middle rear barb is the outlet and the two in the front the inlets (or one inlet and one to refill the system, for example).

[TREE]

hey Kumo how much would it be for the zalmon heat block on its own?

[Kumo]

For the moment all the watercooling stuff is sold. Sorry.

If there is any change i'll post.

[Lemmingzappa]

Well it would be quite annoying to ip the stuff from spain, so your better off selling to someone over there.

[Kumo]

The watercooling stuff is sold.